I purchased a 1970 Mach 1. That is what I was told. I have no reason to doubt it either. The car has all the Mach 1 stuff. The problem is, the identification sticker is badly faded. I can't read all the numbers. I pulled the fender off and what I can read on the door does match the numbers on the frame. The problem is I only really have the serial number for the car. It is 0F195816. Is there somewhere I can go to track down the details of this car with just the serial number? Any help would be appreciated.

Your missing some numbers / letters in your readout. There should be 11, such as 0R05M129276. Without all of them it's a guess
Bill, Las Vegas Nevada

Isn't there a badge behind the windscreen, drivers side, just above the dash ?

No there is no tag on by the dash. That was the reason I pulled the fender. So there is no way to look up the serial number?

Couple kewl sites that are imformative

http://www.youtube.com/watch?v=mTCvNT_03cA

http://www.mustangdecoder.com/decoder.html#linking

This guy can tell you everything about your stang

http://www.martiauto.com/

But Serial # is going to be required. Was there a bill of sale or ownership given with the car?? Any invoice's

I also have another plate with the Serial # on it that is on the Rad Support. I am not 100% sure if all 70 Mustangs have this on the Rad support or it depends on where it was built. Mine is on the Right Front right beside the headlight.

Hi!

Just send the numbers you seen on this plate and I decode for you.

Ray