Number of posts : 11 Registration date : 2008-01-07
Subject: mach 1 seat belt question Fri 13 Jun - 11:02
Hello, can anyone out there supply a photo or info on what the correct seat belts look like for the 70 mach 1? When I purchased mine they were all absent. Metal or black plastic buckles? Any help would be appreciated.
Raytags
Number of posts : 291 Age : 58 Your location : Boucherville, Québec, Canada. Registration date : 2004-09-20
Subject: Re: mach 1 seat belt question Sun 15 Jun - 16:09
Hello!
2 models of seatbelts was available one is standard black plastic.
and the other is a deluxe belts with stainless steel buckle.
check on your Marti report to find the correct seatbelts.
Ray
seventy_mach_one Mach1 Member
Number of posts : 11 Registration date : 2008-01-07
Subject: Re: mach 1 seat belt question Mon 16 Jun - 21:50
thanks, ray!
seventy_mach_one Mach1 Member
Number of posts : 11 Registration date : 2008-01-07
Subject: Re: mach 1 seat belt question Fri 20 Jun - 19:17
Another question...is the only difference between the standard and deluxe belts the buckle part? Are all the other belt and retractor pieces the same?
Thanks!
Raytags
Number of posts : 291 Age : 58 Your location : Boucherville, Québec, Canada. Registration date : 2004-09-20
Subject: Re: mach 1 seat belt question Sun 22 Jun - 20:36
Hello!
Probably, because I dont have installed my deluxe belts in my Mach1 at this moment.
Ray
seventy_mach_one Mach1 Member
Number of posts : 11 Registration date : 2008-01-07
FYI...upon further research I've found that the male buckle portions are different for standard and deluxe belts. They have a slightly different shaped hole punched out that will only fit properly with the correct match.
Metuchen Mach1 Member
Number of posts : 11 Registration date : 2013-08-07
Subject: Re: mach 1 seat belt question Tue 27 Aug - 11:21
I've also seen standard belts with different male buckles. Some square holes and some rectangular... Maybe it depends if it is an early build?? Or the assembly plant.